Quick Order

- 35mm Diameter hole with a 10mm shallow cup depth
- Clip-on, full overlay with cam adjustment on hinge arm
- 304 Grade Stainless Steel hinge & mounting plate
- 45mm drilling centres + Screw In
- Includes 15.5mm 304 Grade Stainless Steel mounting plate screws

- Soft Closing with adjustable speed - Provides 3D adjustments (height, side & depth) - upper +/-2mm, lower +2/-1mm - Suitable for doors 650-1040mm high - Weight capacity up to 19.8kg - Hovering adjustment - Stays at the desired position - Easy to open - Easy installation, door clips on & off without tools - Door thickness 16-28mm

- New Zealand Made
- Simple system for bi-fold doors
- White plastic
- Average install time of 5 minutes
- EZI330 commonly for deeper units (base cabinets etc)
- EZI530 commonly for larger opening (pantries, closets etc)

- 100 Newtons Strength
- Note: Do not apply petroleum-based lubricants
- Instalment:
       - Door Fixed Location: 55mm
       - Side Panel Fixed Location: 260 +2mm/-2mm
       - Cabinet Depth Location: 28mm

Indaux Folding Door Track & Rollers
- 25kg weight rating
- Upper track supplied in 3 metre lengths. 
- Lower track supplied in 2 metre lengths

Note: Place sliding door intermediate hinges over the swing door hinges.

- Unwanted door movement prevented thanks to the soft closing smooth runners lower bearing and their triple running points.
- Automatic and cushioned gradual soft-closing.
- 50kg load rating.
- Aluminium handle designed to suit 18mm door thickness.

VIEW INFO SHEET FOR MORE DETAIL

• 52, 5.5mm Pattern
• Depth of hinge cap 11.3mm
• Diameter of hinge cap 35mm
• Possible drilling distance on door 3-7mm
• Range of door thickness 14-24mm

- For C93 & C98 Series Hinges
- Cam adjustable plates adjust height to +2/-2mm
- Euro Screw fix fixing
- 3 different size plates available

-  45° to 110°angle
- 110° opening angle
- Drilling Pattern 52/10
- Depth of hinge cap 11.5mm
- Diameter of hinge cap 35mm
- Door thickness range 16-26mm
- Drilling distance on the door 3-6mm
- +2mm/-4mm side adjustment
- +2mm/-2mm cam adjustment up and down
- 26mm thick doors with standard hinge
- Easily fine-tuned soft close adjustment for small doors
- Highly slam resistant

-  45° to 110°
- 110° opening angle
- Drilling Pattern 52/10
- V Door Overlay
- Depth of hinge cap 11.5mm
- Diameter of hinge cap 35mm
- Door thickness range 16-26mm
- Drilling distance on the door3-6mm

-  90° angle
- 110° opening angle
- Drilling Pattern 52/10
- Depth of hinge cap 11.5mm
- Diameter of hinge cap 35mm
- Door thickness range 16-26mm
- Drilling distance on the door 3-6mm