-
- Keep all drawer systems the same in your project
- All Concept kits are for drawers 500mm deep
- Concept 560 kits can be fitted into most brands of drawer that are already installed into cabinetry, keeping all the drawers in the kitchen the same
- These brand include: Blum Tandembox Plus, Blum Tandembox Intivo, Grass DWD XP, Grass Nova Pro Deluxe, Grass Nova Pro Classic and Hettich Architech
- Bins available for cabinets 300mm, 400mm, 450mm and 500mm
- Two colours available - Light Grey + Orion Grey
- Capacity from 16 litres to 58 litres
- Bins either 298mm or 463mm high
- Bins supplied with lids
- Can be mounted in 16mm and 19mm cabinets
- Loose bins available to purchase
Note: These kits cannot be installed in drawers where the Blum Tip On system is used -
Replacement bins for the Concept 560 Range or on their own as In-Drawer Bins
- Available in two colour options (Orion Grey & Light Grey)
- Comes with lid
- Three size options (8 Litres, 17 Litres & 29 Litres)
- Sit loose in drawers -
- All Concept kits are for drawers 500mm deep
- Concept 571 kits fit into Blum Legrabox, C height
- Bins available for cabinets 450mm and 500mm
- Capacity of 37 litres or 60 litres
- Bins either 360mm or 463mm high
- Can be mount in 16mm and 19mm cabinets
Note: These kits cannot be installed in drawers where the Blum Tip On system is used -
We custom manufacture any size, from various profiles, with lots of glass options and hardware drilled for and supported as required.
- Made to order
- Available in four different profiles:
- Fineline 50 x 20mm
- Twinline 50 x 20mm
- Squareline 20 x 20mm
- Broadline 50 x 20mm
- Available in Standard Anodised & Power Coating (Dulux & Interpon Colour Range) for all profiles and Black Anodised in Squareline and Fineline profiles only.
- Glass options include Etchlite (frosted), Clear, and others.
- Drilled for Blum hardware unless otherwise requested.
- Order form must be completed for all quotes and orders (Click on the order form below, print and complete then forward to [email protected] for a quotation)IMPORTANT: We are unable to provide warranty on any doors over the recommended size of 2000mm high x 500mm wide for the Squareline Profile
-
-
-
-
-
Custom made stainless steel adjustable breakfast bar leg. 63mm Stainless Steel Tubing - 304 Grade. Specify the minimum overall length from the underside of your bench to floor. Legs will be manufactured with 10-15mm adjustment up from your "wound hard down" measurement.
-
Custom made stainless steel breakfast bar leg. 75mm Square x 700 - 1100mm high. Please specify height required when ordering.
-
Custom made stainless steel adjustable breakfast bar leg 50mm square. Please specify height required when ordering Specify overall length from underside of bench to floor. Legs will be manufactured to allow + or - 10mm.