-
- Removable divider for waste separation
44 litre storage capacity
- Robust, solid tubular frame
- Top/bottom mounting removable hi-impact plastic bin, easy to clean
- Cleverly designed lid prevents odours
- Smooth running ball race runners -
10 Litre bin supplied as part of the unit. • Stainless steel • Easily fitted into new or existing tops • Snug fitting lid with seal • Accommodates standard bin liners (10 litre bin supplied) • Hole cutout 272mm
-
-
-
-
The No 110 is a simple sleek bow style handle, available in a range of contemporary finishes and different sizes to use throughout your kitchen space.
-
Enko has designed a new series of extrusion handles to give you even more flexibility and offers these extrusions in two finishes. Anodised aluminium finish which is a long-standing favourite. Or in a raw milled finish to allow you to cut the extrusions to any required length and then powder coat in the colour of your choice. All these new extrusions are fitted over the top of the door or drawer front and can be glued in place or fixed/screwed from the rear face. Drilling is your responsibility. Supplied in 3m lengths, suitable for 18mm board. No. 125C Can also be inverted for use at the bottom of doors on overhead cupboards
-
Fitted into a groove in the top of the drawer front or door.
Available in Anodised Aluminium finish only.
Supplied in 2.4m lengths, suitable for 18mm board. -
Enko's #130 extrusion is a Beautiful and Strong handle-free solution made here in New Zealand.
The robust construction of the #130 profile removes the need for a separate support rail, gives strength to the cabinet and creates manufacturing efficiencies.
There is a #130 finish to suit any project, available in Powder coated Black or White, Anodised Silver, or in DIY raw.
The 42mm top rail and 52mm middle rail come in extra-long 3.6m lengths to minimize offcut wastage, and there are various brackets and end-caps for easy installation and a perfect finish.
SEE INFO SHEET FOR MORE DETAIL. -
Enko's #130 extrusion is a Beautiful and Strong handle-free solution made here in New Zealand.
The robust construction of the #130 profile removes the need for a separate support rail, gives strength to the cabinet and creates manufacturing efficiencies.
There is a #130 finish to suit any project, available in Powder coated Black or White, Anodised Silver, or in DIY raw.
The 42mm top rail and 52mm middle rail come in extra-long 3.6m lengths to minimize offcut wastage, and there are various brackets and end-caps for easy installation and a perfect finish.
SEE INFO SHEET FOR MORE DETAIL.